 Best Sellers | | Home Intellinet, RJ45 Female to Female UTP CAT.6 Keystone Coupler, White | |
|  | |  | | | Intellinet, RJ45 Female to Female UTP CAT.6 Keystone Coupler, White | | | | | | | |
List Price:
| | |
Our Price:
| $2.69 | |
You Save:
| | | Shipping: | Free | |
*Shipping:
| |
| | | SKU:
SG-J6SE-VIZM-Stickerless | | In Stock | | Availability:
Usually ships in 1-2 business days | | |
|
| | Features | For use with Cat.6 Ethernet cables / Backward compatible with lower rated category componentsConnectors: One RJ45 female to One RJ45 femaleRJ45 feed-thru coupler for voice / data applicationsCompatible with all BestLink Netware Cat.5E and Cat.6 patch cables & keystone wallplates and patch panelsLifetime Warranty
| |
| | Description | Intellinet, RJ45 Female to Female UTP CAT.6 Keystone Coupler, White; For use with unshielded twisted pair (UTP) Cat6 cable. Cat6 performance is in compliance with ANSI/TIA/EIA 568 B.2-1 standard. 50 micron gold plated contacts. UL Listed, 568 A/B color coded, Straight-through wiring. Plastic housing. | |
| | Product Details | | Product Weight: | 0.02 pounds | | Package Length: | 3.5 inches | | Package Width: | 2.0 inches | | Package Height: | 0.2 inches | | Package Weight: | 0.02 pounds | | Average Customer Rating: |  based on 26 reviews |
| |
| | Customer Reviews | Average Customer Review: ( 26 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
34 of 34 found the following review helpful:
Makes that last bit of wiring a snap Feb 23, 2011
By Paul Gifford
I recently ran cat 6 cable throughout our house, upgrading our home LAN to (wired) gigabit speed and (wireless) 802.11n. This new network replaced our old combination of 802.11g wireless and cat 5e cable. The cat5e cable wasn't installed that well, I must admit (as the installer). I'd run cables behind appliances, under and on top of baseboard molding, and through the floor in one instance.
This time I wanted a clean, professional installation. I spent a lot of time running cable through the attic and basement, drilling through joists, and fishing cable through walls. After doing all that work the last thing I wanted to do was wire up my own jacks. That's where these came in. I cut a hole in the drywall, fished the cable through hole, and had a professional-looking installation using this coupler, a low voltage old work bracket, and a single gang wall plate.
In two rooms I replaced the existing coaxial cable jack with a two hole wall plate, this coupler, and a keystone coax cable module. I've seen the latter called "F-pin", "F-type", and "F coupler". FYI, the bracket, wall plates, and coax connectors are all available at your local big box hardware store very cheaply. I didn't see any cat 6 couplers there, just cat 5e punchdown jacks.
I installed 3 of these around the house and they all work great. The computers at each spot all report a 1.0 Gbps connection. The coupler fits fine in either an On-Q keystone wall plate or a Leviton Quickport plate. The "CAT 6" embossed above the jack is a nice touch.
This coupler is highly recommended. After a weekend of breathing drywall dust and itching from fiberglass insulation it was nice to have an easy finish to the job. Click the coupler into the wall plate then click the cable into the coupler, screw the wall plate to the bracket, and the job was done.
7 of 7 found the following review helpful:
Works as advertised! Jun 04, 2010
By Anil
Works as advertised. Female connector on both sides. Plug it into any standard keystone wallplate and you have a professional looking install. Connectivity tested on two units and works great.
3 of 3 found the following review helpful:
Perfect ethernet coupler for my setup. Mar 18, 2011
By A. DeJesus
I wanted a wired ethernet connection from my office router to my tv in the family room. This ethernet coupler fit nicely in a Leviton faceplate(leftover from another project) that I mounted on the wall close to the tv. I didn't have to deal with handling the delicate wire strands on another kind of coupler. This coupler accepts an RJ45 connector from a regular ethernet cable and is perfect for my setup.
2 of 2 found the following review helpful:
Does what it's suppose to do. Sep 09, 2011
By Cody
Yeah, it does what its suppose to do. it connects two Ethernet cables/rj45's together. No problems here, just make sure you hear the click and they are snug.
Max length for normal rj45/cat6/ethernet is 400-500ft or so. past that you will have way to many connection and dropped signal issues.
2 of 2 found the following review helpful:
 easy installation Aug 15, 2010
By W. Evans
very easy to install in faceplate for a clean uncluttered look. Works well, I have had for 2 months, and use everyday with no disconnects.
See all 26 customer reviews on Amazon.com
| |
| |
| |  | |  |
|
Recently Viewed | You may also like ... |
